Comparative Evaluation of Shear Bond Strength of Conventional Composite Resin and Nanocomposite Resin to Sandblasted Primary Anterior Stainless Steel Crown

To evaluate and compare the shear bond strength of conventional composite resin and nanocomposite resin to sandblasted primary anterior stainless steel crown. The study samples consisted of 30 primary anterior stainless steel crowns (Unitek TM, size R4), embedded in resin blocks with crown, in test groups of 15 samples each. Mounting of the crown was done using resin block with one crown each. Sandblasting was done and the bonding agent Prime and Bond NT (Dentsply) was applied on the labial surface of the primary anterior sandblasted crown. The composite resin and nanocomposite resin were placed into the well of Teflon jig and bonded to Stainless Steel Crowns. The cured samples were placed in distilled water and stored in incubator at 37 degrees C for 48 hours. Shear bond strength was measured using universal testing machine (Hounsefield U.K. Model, with a capacity of 50 KN). Independent sample 't' test revealed a nonsignificant (P < 0.385) difference between mean shear bond strength values of conventional and nanocomposite group. The bond strength values revealed that nanocomposite had slightly higher mean shear bond strength (21.04 +/- 0.56) compared to conventional composite (20.78 +/- 0.60). It was found that conventional composite resin and nanocomposite resin had statistically similar mean shear bond strength, with nanocomposite having little more strength compared to conventional composite.