» Articles » PMID: 15516866

Mechanical Characterisation of a Bone Defect Model Filled with Ceramic Cements

Overview
Publisher Springer
Date 2004 Nov 2
PMID 15516866
Citations 8
Authors
Affiliations
Soon will be listed here.
Abstract

Ceramic bone substitute materials are often used to fill defects in comminuted articular fractures. In an in vivo study [1], calcium phosphate cements have been injected into highly loaded slot defects in the proximal tibial metaphysis. During healing, cracks were formed mostly in the proximal anterior aspect of the implanted cement and wedge-like gaps formed between the tibial plateau and the cement. Mechanical ex vivo tests were done to investigate the mechanical competence of the bone cement in such a defect situation. Entirely filled defects were loaded with up to 4.5 kN until they failed. Cyclic loading of the proximal tibiae caused micro fragmentation of the cement after 1000 cycles at 1.5-2.0 kN load. This aspect was comparable to cement fragmentation observed in vivo. Large defects in highly loaded areas should therefore additionally be stabilised with metallic implants. The ceramic cement can only be used as a filler material, which can be replaced by new bone upon resorption.

Citing Articles

Recent Trends in Hydroxyapatite Supplementation for Osteoregenerative Purposes.

Zastulka A, Clichici S, Tomoaia-Cotisel M, Mocanu A, Roman C, Olteanu C Materials (Basel). 2023; 16(3).

PMID: 36770309 PMC: 9919169. DOI: 10.3390/ma16031303.


Can barb thread design improve the pullout strength of bone screws?.

Feng X, Qi W, Fang C, Lu W, Leung F, Chen B Bone Joint Res. 2021; 10(2):105-112.

PMID: 33522293 PMC: 7937542. DOI: 10.1302/2046-3758.102.BJR-2020-0072.R2.


Settable polymer/ceramic composite bone grafts stabilize weight-bearing tibial plateau slot defects and integrate with host bone in an ovine model.

Lu S, McGough M, Shiels S, Zienkiewicz K, Merkel A, Vanderburgh J Biomaterials. 2018; 179:29-45.

PMID: 29960822 PMC: 6065109. DOI: 10.1016/j.biomaterials.2018.06.032.


Compressive fatigue properties of an acidic calcium phosphate cement-effect of phase composition.

Ajaxon I, Ohman Magi C, Persson C J Mater Sci Mater Med. 2017; 28(3):41.

PMID: 28144853 PMC: 5285421. DOI: 10.1007/s10856-017-5851-5.


Compressive fatigue and fracture toughness behavior of injectable, settable bone cements.

Harmata A, Uppuganti S, Granke M, Guelcher S, Nyman J J Mech Behav Biomed Mater. 2015; 51:345-55.

PMID: 26282077 PMC: 4581977. DOI: 10.1016/j.jmbbm.2015.07.027.


References
1.
Ohura K, Bohner M, Hardouin P, Lemaitre J, Pasquier G, Flautre B . Resorption of, and bone formation from, new beta-tricalcium phosphate-monocalcium phosphate cements: an in vivo study. J Biomed Mater Res. 1996; 30(2):193-200. DOI: 10.1002/(SICI)1097-4636(199602)30:2<193::AID-JBM9>3.0.CO;2-M. View

2.
Hing K, Best S, Tanner K, Revell P, Bonfield W . Histomorphological and biomechanical characterization of calcium phosphates in the osseous environment. Proc Inst Mech Eng H. 1998; 212(6):437-51. DOI: 10.1243/0954411981534204. View

3.
Gisep A, Wieling R, Bohner M, Matter S, Schneider E, Rahn B . Resorption patterns of calcium-phosphate cements in bone. J Biomed Mater Res A. 2003; 66(3):532-40. DOI: 10.1002/jbm.a.10593. View

4.
Lemaitre J, Munting E, Mirtchi A . Setting, hardening and resorption of calcium phosphate hydraulic cements. Rev Stomatol Chir Maxillofac. 1992; 93(3):163-5. View

5.
Constantz B, Ison I, Fulmer M, Poser R, Smith S, VanWagoner M . Skeletal repair by in situ formation of the mineral phase of bone. Science. 1995; 267(5205):1796-9. DOI: 10.1126/science.7892603. View